Wintv usb2 software download

If you are still unable to use the remote control, this may be a hardware problem and would require repair of the device. Please contact our Tech Support Dept at techsupport hauppauge. Download Prodinfo. The driver for the device must be installed in order to run Prodinfo.

A Pentium II Mhz minimum is required. If it is, unplug the power from the unit and restart the computer. Upon reboot, plug it in again and try WinTV again. If the Hardware Wizard detects the device, continue the installation of the drivers using the supplied installation CD Rom.

If the hardware wizard does not detect the device, there may be a problem with the hardware. If you get the same problem, the hardware may be defective and require repair.

Contact Tech Support for more information. Please make sure you have the latest version driver. Try inserting the channels manually to see if the video comes up. Also refer to Intervideo Conflicts. If video does show up, the device is good. Installation on multiple computers: the WinTV application can be installed on as many PCs as needed as long as you use the same Hauppauge device. So as long as you use the same Hauppauge device, you can install on more than one computer.

WinTV v10 runs with Windows 11, but with some older Hauppauge products, you need to turn off the 'memory integrity' option on Windows For more information, see the Microsoft website. If you do not see your Hauppauge product listed, please email us at: techsupport hauppauge.

WinTV v10 Users Manual. Click on the setting button Gear in the lower left of the WinTV v10 application. Depending upon which Hauppauge tuner you have, you will have a choice of analog, digital or external inputs see the second picture below. You can also select all formats and let the WinTV application show you what it finds in each format if anything. The results should look like picture 3 below. The only problem with S-Video is that many video sources, such as cable TV boxes, have composite video but not S-Video.

Please see the following pictures to set the input source on the USB-Live2. Also, the audio needs to be routed from your microphone or other audio source to the "Line in" jack on your PC. The Hauppauge YouTube channel. Capture WinTV v8. Installation notes for WinTV v8.

Then click the tab marked " Crossbar " and click " Input". You will see a list of video input sources which USB-Live-2 has.

Set the input source to the one you want to use.